X-ray Photoelectron Spectroscopy (XPS) is one of the most widely used surface analysis techniques. It can be applied to a broad range of materials and provides valuable quantitative and chemical state information from the surface of the material being studied.
As the demand for high performance materials increases, so does the importance of surface engineering. Many of the problems associated with modern materials can only be solved by better understanding the physical and chemical interactions that occur at the surface or at the interfaces of a material’s layers. The surface chemistry will influence such factors as corrosion rates, catalytic activity, adhesive properties, wettability, contact potential and failure mechanisms.
The material’s surface is the point of interaction with the external environment and other materials. Therefore, surface modification can be used in a wide variety of applications to alter or improve the performance and behavior of a material. XPS can be used to analyse the surface chemistry of a material after an applied treatment such as fracturing, cutting or scraping. From characterisation of nuclear waste materials to thin-film electronics and bio-active surfaces, XPS is the standard tool for surface material characterisation.
Synchrotron radiation has a variety of properties which make it an attractive source for quantitative X-ray photoelectron spectroscopy. Among the most significant are the high intensity and tunable energy it produces. This continuous source of energy means that selected wavelengths can be employed to allow depth-dependent chemical analysis (e.g. cross section and absorption edge) of a material or element being researched. In addition, the increased photon intensity of a synchrotron leads to shorter data acquisition times when compared to lab-based X-ray sources. Modern synchrotron-based ambient pressure XPS systems are also able to operate at pressures higher than 7 mbar which allows the investigations of surfaces in equilibrium with, for example, water vapour in more industrially relevant conditions.
B07 will be a highly versatile soft x-ray beamline for NEXAFS/XPS suitable for studies of heterogenous catalysis, pharmaceuticals & biomaterials under realistic conditions, electronic & photonic materials, atmospheric & space science on liquids/ices and heritage conservation.
More information
I09 is designed to provide both soft and hard X-rays for high-resolution studies of atomic and electronic structures of surfaces and interfaces using photoelectron spectroscopy, near edge X-ray absorption fine structure, X-ray standing waves and photoelectron diffraction.
More informationNear Ambient Pressure XPS (NAP-XPS) is a technique to whereby XPS characterisation is carried out under realistic conditions. It is widely used in surface analysis.
B07 will be a highly versatile soft x-ray beamline for NEXAFS/XPS suitable for studies of heterogenous catalysis, pharmaceuticals & biomaterials under realistic conditions, electronic & photonic materials, atmospheric & space science on liquids/ices and heritage conservation.
More informationDiamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Copyright © 2022 Diamond Light Source
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.